Dr. Shashi Bahl
Assistant Professor
- Mobile Number
- Email Address
- Teaching Experience
- Area of Interest (Teaching)
- Area of Interest (Research)
- Complete Profile
- login
Educational Qualification
- PhD (Mechanical Engineering): Martin-Luther-University Halle-Wittenberg, Halle (Saale), GERMANY within the Joint research graduate school StrukturSolar sponsored by the German Ministry of Education and Research (2012-2016)
- Master of Technology (Mechanical Engineering with specialization in CAD/CAM & Robotics): Indian Institute of Technology Roorkee, Uttarakhand, INDIA with MHRD Scholarship, Government of India, New Delhi (2007-2009)
- Master Thesis: Karlsruhe Institute of Technology, Karlsruhe, GERMANY with DAAD Scholarship (German Academic Exchange Service) offered under DAAD-IIT Master Sandwich Scholarship Programme (September 2008-May 2009)
- Bachelor of Technology (Mechanical Engineering): Dr. B.R. Ambedkar National Institute of Technology Jalandhar, Punjab, INDIA (1996-2000)
Teaching Experience
- Assistant Professor I.K. Gujral Punjab Technical University Jalandhar, Kapurthala, Punjab, INDIA (31.05.2010 )
- Research Assistant Karlsruhe Institute of Technology, Karlsruhe, GERMANY (01.09.2008 )
- Lecturer Maharishi Markandeshwar University, Mullana, Ambala, Haryana, INDIA (22.08.2001 )
- Graduate Engineer Trainee Minda Industries Limited, New Delhi (02.08.2000 )
Area of Interest (Teaching)
- Strength of Materials, Fluid Mechanics, Computer Aided Design, Computer Aided Manufacturing, Finite Element Methods
Area of Interest (Research)
- Thin Film Solar Cells, Metal Matrix Composites, Additive Manufacturing, Finite Element Methods, Advanced Materials, Fracture Mechanics of Brittle Materials, Modeling the Crack Propagation in Thin Films, Cohesive Zone Modeling (CZM) for Interface Delaminating Analysis
Awards & Honors
- Selected as a Research Associate to pursue PhD (Mechanical Engineering) from Martin Luther University Halle-Wittenberg, Halle (Saale), GERMANY within the Joint research graduate school StrukturSolar sponsored by the German Ministry of Education and Research (BMBF), GERMANY from August 2012 to March 2016. Awarded MHRD Scholarship (Ministry of Human Resource Development), Government of India, New Delhi to pursue Master of Technology degree in Mechanical Engineering at Indian Institute of Technology (IIT) Roorkee during the years 2007-2009. All India Rank 432 in the prestigious GATE - 2007 Examination (Graduate Aptitude Test in Engineering 2007), INDIA. Best Research Paper Award for the paper titled Automation and manufacturing of smart materials in Additive Manufacturing technologies using Internet of Things towards the adoption of Industry 4.0 in International Conference on Aspects of Materials Science and Engineering (ICAMSE-2021) held at UIET, Panjab University, Chandigarh on 5th
- Awarded DAAD Scholarship (German Academic Exchange Service) offered under DAAD-IIT Master Sandwich Scholarship Programme to pursue Master Thesis at Karlsruhe Institute of Technology (KIT), Karlsruhe, GERMANY from September 2008 to May 2009.
Research Publications
| Title of Paper | Name of Author/s | Journal | Year | ISSN | Link |
|---|---|---|---|---|---|
| Electricity Generation Through Water Supply Pipes in High Rise Buildings | R. Suman, M. Javaid, D. Nandan, Shashi Bahl, A. Haleem | Journal of Industrial Integration and Management | 2020 | 2424-8622 | Ref Link |
| Axisymmetric finite element analysis of single fiber push-out test for stainless steel wire reinforced aluminum matrix composites | Shashi Bahl | Materials Today: Proceedings | 2020 | 2214-7853 | Ref Link |
| An experimental study to measure the acoustical properties of natural fibers at real case broadband excitations | Shashi Bahl, R. Cambow, A.K. Bagha | Materials Today: Proceedings | 2020 | 2214-7853 | Ref Link |
| Industry 4.0 technologies and their applications in fighting COVID-19 pandemic | M. Javaid, A. Haleem, R. Vaishya, Shashi Bahl, R. Suman, A. Vaish | Diabetes & Metabolic Syndrome: Clinical Research & Reviews | 2020 | 1871-4021 | Ref Link |
| Sustainability of Coronavirus on different surfaces | R. Suman, M. Javaid, A. Haleem, R. Vaishya, Shashi Bahl, D. Nandan | Journal of Clinical and Experimental Hepatology Journal of Clinical and Experimental Hepatology | 2020 | 0973-6883 | Ref Link |
| Smart materials types, properties and applications: A review | Shashi Bahl, H. Nagar, I. Singh, S. Sehgal | Materials Today: Proceedings | 2020 | 2214-7853 | Ref Link |
| Impact of the coronavirus pandemic on the supply chain in healthcare | K.P. Iyengar, R. Vaishya, Shashi Bahl, A. Vaish | British Journal of Healthcare Management | 2020 | 1358-0574 | Ref Link |
| Numerical simulation of the debonding behavior of fiber reinforced metal matrix composites | Shashi Bahl | Materials Today: Proceedings | 2020 | 2214-7853 | Ref Link |
| Challenges and solutions in meeting up the urgent requirement of ventilators for COVID-19 patients | K. Iyengar, Shashi Bahl, Raju Vaishya, A. Vaish | Diabetes & Metabolic Syndrome: Clinical Research & Reviews | 2020 | 1871-4021 | Ref Link |
| Redefining diabetic foot disease management service during COVID-19 pandemic | I. Jaly, K. Iyengar, Shashi Bahl, T. Hughes, R. Vaishya | Diabetes & Metabolic Syndrome: Clinical Research & Reviews | 2020 | 1871-4021 | Ref Link |
| Significance of Health Information Technology (HIT) in Context to COVID-19 Pandemic: Potential Roles and Challenges | R.P. Singh, M. Javaid, A. Haleem, R. Vaishya, Shashi Bahl | Journal of Industrial Integration and Management | 2020 | 2424-8622 | Ref Link |
| Experimental study to measure the sound transmission loss of natural fibers at tonal excitations | A. Kesharwani, R. Bedi, A. Kumar Bagha, Shashi Bahl | Materials Today: Proceedings | 2020 | 2214-7853 | Ref Link |
| Corona warriors under risk during COVID-19 pandemic | Shashi Bahl, T. Goyal | Current Medicine Research and Practice | 2020 | 2352-0817 | Ref Link |
| Letter to the editor in response to: Telemedicine for diabetes care in India during COVID19 pandemic and national lockdown period: Guidelines for physicians | R. Vaishya, Shashi Bahl, R.P. Singh | Diabetes & Metabolic Syndrome: Clinical Research & Reviews | 2020 | 1871-4021 | Ref Link |
| Telemedicine technologies for confronting COVID-19 pandemic: A Review | Shashi Bahl, R.P. Singh, M. Javaid, I.H. Khan, R. Vaishya, R. Suman | Journal of Industrial Integration and Management | 2020 | 2424-8622 | Ref Link |
| Blockchain technology and its applications to combat COVID-19 pandemic | A. Sharma, Shashi Bahl, A.K. Bagha, M. Javaid, D.K. Shukla, A. Haleem | Research on Biomedical Engineering | 2020 | 2446-4732 | Ref Link |
| Significant applications of machine learning for COVID-19 pandemic | S. Kushwaha, Shashi Bahl, A.K. Bagha, K.S. Parmar, M. Javaid, A. Haleem, R.P. Singh | Journal of Industrial Integration and Management | 2020 | 2424-8622 | Ref Link |
| Predicting the effect of fiber orientations and boundary conditions on the optimal placement of PZT sensor on the composite structures | R. Samyal, A.K. Bagha, R. Bedi, Shashi Bahl, K.K. Saxena, S. Sehgal | Materials Research Express | 2021 | 2053-1591 | Ref Link |
| A systematic review on recent progress in advanced joining techniques of the lightweight materials | Shashi Bahl, T. Singh, V. Kumar, S. Sehgal, A.K. Bagha | AIMS Materials Science | 2021 | 2372-0484 | Ref Link |
| Finite element model updating of metallic and composite structures - A state of the art review | A. Sharma, A.K. Bagha, D.K. Shukla, Shashi Bahl | AIMS Materials Science | 2021 | 2372-0484 | Ref Link |
| 3D Printing Technology and its Significant Applications in the Context of Healthcare Education | I. Tasneem, A. Ariz, D. Bharti, A. Haleem, M. Javaid, Shashi Bahl | Journal of Industrial Integration and Management | 2021 | 2424-8622 | Ref Link |
| Can open access publishing be made | K.P. Iyengar, V.K. Jain, Shashi Bahl, R. Vaishya | The American Journal of Emergency Medicine | 2021 | 0735-6757 | Ref Link |
| Finite element analysis of VGCF/pp reinforced square representative volume element to predict its mechanical properties for different loadings | A.K. Bagha, Shashi Bahl | Materials Today: Proceedings | 2021 | 2214-7853 | Ref Link |
| Finite element modeling and simulation of the fiber | Shashi Bahl, A.K. Bagha | Materials Today: Proceedings | 2021 | 2214-7853 | Ref Link |
| 3D scanning of a carburetor body using COMET 3D scanner supported by COLIN 3D software: Issues and solutions | A. Haleem, P. Gupta, Shashi Bahl, M. Javaid, L. Kumar | Materials Today: Proceedings | 2021 | 2214-7853 | Ref Link |
| Advancement of multi | Shashi Bahl, A.K. Bagha, M. Javaid, A. Haleem | Current Medicine Research and Practice | 2021 | 2352-0817 | Ref Link |
| Finite element analysis for predicting the vibration characteristics of natural fiber reinforced epoxy composites | M.K. Saini, A.K. Bagha, S. Kumar, Shashi Bahl | Materials Today: Proceedings | 2021 | 2214-7853 | Ref Link |
| Improving material quality management and manufacturing organizations system through Industry 4.0 technologies | M. Ammar, A. Haleem, M. Javaid, R. Walia, Shashi Bahl | Materials Today: Proceedings | 2021 | 2214-7853 | Ref Link |
| Advancements in Biosensor Technologies for Medical Field and COVID-19 Pandemic | Shashi Bahl, A.K. Bagha, S. Rab, M. Javaid, A. Haleem, R.P. Singh | Journal of Industrial Integration and Management | 2021 | 2424-8622 | Ref Link |
| Bioengineering technology in context to COVID-19 pandemic⬯: Potential roles and applications | Shashi Bahl, K. Iyengar, A.K. Bagha, I. Jaly, V. Jain, R. Vaishya | Journal of Industrial Integration and Management | 2021 | 2424-8622 | Ref Link |
| Nanomedicine Technology and COVID-19 Outbreak: Applications and Challenges | N. Gupta, Shashi Bahl, A.K. Bagha, S. Vaid, M. Javaid, A. Haleem | Journal of Industrial Integration and Management | 2021 | 2424-8622 | Ref Link |
| COVID-19 Pandemic and Debates on the Design of Operating Theatre Ventilation Systems in Healthcare Facilities | I. Jaly, K.P. Iyengar, Shashi Bahl, V. Jain, R. Vaishya | Journal of Industrial Integration and Management | 2021 | 2424-8622 | Ref Link |
| Automation and manufacturing of smart materials in additive manufacturing technologies using Internet of Things towards the adoption of industry 4.0 | R. Ashima, A. Haleem, Shashi Bahl, M. Javaid, S.K. Mahla, S. Singh | Materials Today: Proceedings | 2021 | 2214-7853 | Ref Link |
| Magneto-rheological abrasive finishing (MAF) of soft material using abrasives | R. Rampal, T. Goyal, D. Goyal, M. Mittal, R.K. Dang, Shashi Bahl | Materials Today: Proceedings | 2021 | 2214-7853 | Ref Link |
| Tissue Engineering and its Significance in Healthcare During COVID-19 Pandemic: Potential Applications and Perspectives | A. Softa, Shashi Bahl, A.K. Bagha, S. Sehgal, A. Haleem, M. Javaid | Journal of Industrial Integration and Management | 2021 | 2424-8622 | Ref Link |
| Exploring the significant applications of Internet of Things (IoT) with 3D printing using advanced materials in medical field | S. Fatima, A. Haleem, Shashi Bahl, M. Javaid, S.K. Mahla, S. Singh | Materials Today: Proceedings | 2021 | 2214-7853 | Ref Link |
| Experimental investigations on brass material and pin | Shashi Bahl, S. Singh, P. Goyal, A.K. Bagha | Materials Today: Proceedings | 2021 | 2214-7853 | Ref Link |
| Mechanical and microstructural behaviour of weldment of two low alloy steels using MIG | V. Kumar, M. Mittal, D. Goyal, T. Goyal, R.K. Dang, Shashi Bahl | Materials Today: Proceedings | 2021 | 2214-7853 | Ref Link |
| Implementing Industry 4.0 technologies in self-healing materials and digitally managing the quality of manufacturing | M. Ammar, A. Haleem, M. Javaid, Shashi Bahl, A.S. Verma | Materials Today: Proceedings | 2021 | 2214-7853 | Ref Link |
| Removing fiber orientation uncertainty from the finite element model of a composite lamina with direct updating algorithm | S.M. Chhipa, P. Kumar, A.K. Bagha, Shashi Bahl | Physica Scripta | 2021 | 1402-4896 | Ref Link |
| Role of smart materials and digital twin (DT) for the adoption of electric vehicles in India | S.S. Kamran, A. Haleem, Shashi Bahl, M. Javaid, D. Nandan, A.S. Verma | Materials Today: Proceedings | 2021 | 2214-7853 | Ref Link |
| Advancement of multi-agent system in healthcare during COVID-19 pandemic | Shashi Bahl, A.K. Bagha, M. Javaid, A. Haleem | Current Medicine Research and Practice | 2021 | 2352-0825 | Ref Link |
| Determination of the material model parameters for high pressure densification induced glass inferred through analytical comparison and its ballistic performance as used in composite laminates | N. Thakur, R.S. Bharj, P. Kumar, P. Sharma, S. Sharma, Shashi Bahl | Physica Scripta | 2022 | 1402-4896 | Ref Link |
| Hot deformation behaviour of Ti alloys: A review on physical simulation and deformation mechanisms | P. Yadav, K.K. Saxena, S. Sehgal, T. Singh, Shashi Bahl | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | 2022 | 0954-4089 | Ref Link |
| Detection dogs cases about their sniffing applications in medical and future application for COVID-19 pandemic | Shashi Bahl, A.K. Bagha, A. Haleem, M. Javaid | Current Medicine Research and Practice | 2022 | 2352-0817 | Ref Link |
| Finite element model updating of microwave welded lap joint with direct updating algorithm | A.K. Bagha, S. Tiwari, S. Kumari, R. Samyal, R. Bedi, N. Sharma, Shashi Bahl | Physica Scripta | 2022 | 1402-4896 | Ref Link |
| Effects of nano filler powder during microwave-based joining of SS304 butt joints | S. Salot, S. Sehgal, B.S. Pabla, H. Kumar, C. Prakash, Shashi Bahl, K.K. Saxena | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | 2022 | 0954-4089 | Ref Link |
| Optimisation of cutting parameters during turning of 16MnCr5 steel using Taguchi technique | S. Agarwal, R. Suman, Shashi Bahl, A. Haleem, M. Javaid, M.K. Sharma, C. Prakash, S. Sehgal, P. Singhal | International Journal on Interactive Design and Manufacturing | 2022 | 1955-2505 | Ref Link |
| Recent advances in additive manufacturing for current challenges, materials and their applications | A.S. Verma, A. Bisht, Sumankant, Shashi Bahl | Indian Journal of Engineering and Materials Sciences | 2022 | 0971-4588 | Ref Link |
| Experimental investigation for the dynamic characteristics of short natural fiber reinforced composite materials | K.S. Pawar, A.K. Bagha, Shashi Bahl, M.K. Agrawal | Indian Journal of Engineering and Materials Sciences | 2022 | 0971-4588 | Ref Link |
| Finite element model updating of smart structures with direct updating algorithm | S. Verma, S. Kango, A.K. Bagha, Shashi Bahl | Physica Scripta | 2022 | 1402-4896 | Ref Link |
| Artificial intelligence and advanced materials in automotive industry: Potential applications and perspectives | S.S. Kamran, A. Haleem, Shashi Bahl, M. Javaid, C. Prakash, D. Budhhi | Materials Today: Proceedings | 2022 | 2214-7853 | Ref Link |
| Understanding the role of advanced materials for energy infrastructure and transmission | A. Shamoon, A. Haleem, Shashi Bahl, M. Javaid, C. Prakash, D. Budhhi | Materials Today: Proceedings | 2022 | 2214-7853 | Ref Link |
| The impact of smart materials, digital twins (DTs) and Internet of things (IoT) in an industry 4.0 integrated automation industry | A.M. Qazi, S.H. Mahmood, A. Haleem, Shashi Bahl, M. Javaid, K. Gopal | Materials Today: Proceedings | 2022 | 2214-7853 | Ref Link |
| IoT-based low-cost 3D mapping using 2D Lidar for different materials | M. Yusuf, A. Zaidi, A. Haleem, Shashi Bahl, M. Javaid, S.B. Garg, J. Garg | Materials Today: Proceedings | 2022 | 2214-7853 | Ref Link |
| Environmental impact of energy production and extraction of materials - a review | A. Shamoon, A. Haleem, Shashi Bahl, M. Javaid, S.B. Garg, R.C. Sharma, J. Garg | Materials Today: Proceedings | 2022 | 2214-7853 | Ref Link |
| Transformation temperature and corrosion behavior of porous NiTi and NiTiCu shape memory alloy | N. Sharma, A. Sharma, K.K. Goyal, S. Gupta, Shashi Bahl, G.K. Sharma | Materials Today: Proceedings | 2022 | 2214-7853 | Ref Link |
| Role of energy technologies in response to climate change | A. Shamoon, A. Haleem, Shashi Bahl, M. Javaid, S.B. Garg | Materials Today: Proceedings | 2022 | 2214-7853 | Ref Link |
| Significant applications of smart materials and Internet of Things (IoT) in the automotive industry | M. Ammar, A. Haleem, M. Javaid, Shashi Bahl, S.B. Garg, A. Shamoon, J. Garg | Materials Today: Proceedings | 2022 | 2214-7853 | Ref Link |
| Structural design and its analysis of two station notching tool for industrial die | S.N. Waghmare, S.D. Shelare, Shashi Bahl, N. Mungle, A.K. Bagha, R.C. Sharma | Materials Today: Proceedings | 2022 | 2214-7853 | Ref Link |
| Strategic Optimization of Post Weld Heat Treatment for Dissimilar TIG Weldment of P22 and P91 Steels | B.J. Singh, A. Duppala, P. Kumar, R. Arora, Shashi Bahl | International Journal of Vehicle Structures and Systems | 2023 | 0975-3540 | Ref Link |
| Behavioural Investigation of Hardness Profile for Dissimilar TIG-Weldment between P22 and P91 Steels | B.J. Singh, S Palli, P Kumar, Shashi Bahl | International Journal of Vehicle Structures and Systems | 2023 | 0975-3540 | Ref Link |
| Ride Behaviour of Three-Wheel Vehicle using Semi-Active Suspension using Skyhook Control Strategy | R.C. Sharma, S. Bhardawaj, S.K. Sharma, Shashi Bahl | International Journal of Vehicle Structures and Systems | 2023 | 0975-3540 | Ref Link |
| Modeling of a two-axle rail vehicle for state estimation | R.C. Sharma, S. Bhardawaj, L.V.V. Gopala Rao, Shashi Bahl | Noise & Vibration Worldwide | 2023 | 0957-4565 | Ref Link |
| Evaluating the dynamic characteristics of microwave-casted metal matrix composite material by using experimental modal analysis | S. Nandwani, S. Vardhan, Shashi Bahl, A.K. Yadav, R. Samyal, A.K. Bagha | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | 2023 | 0954-4089 | Ref Link |
Conferences
| S.No | Authors | Title of Paper | Name of Conference |
|---|---|---|---|
| 1 | R. Suman, D. Nandan, A. Haleem, Shashi Bahl, M. Javaid | Experimental study of electroless plating on acrylonitrile butadiene styrene polymer for obtaining new eco-friendly chromium-free processes | International Conference on Aspects of Materials Science and Engineering (ICAMSE-2020) held at UIET, Panjab University Chandigarh from 29th |
| 2 | R. Suman, D. Nandan, A. Haleem, Shashi Bahl, M. Javaid | Comparative study of silicon dioxide and kaolinite ratio for temperature and humidity variations of earth energy enabled cooling system and traditional cooler | International Conference on Aspects of Materials Science and Engineering (ICAMSE-2020) held at UIET, Panjab University Chandigarh from 29th |
| 3 | Shashi Bahl, J. Dolma, J. Jyot Singh, S. Sehgal | Biodegradation of plastics: A state of the art review | International Conference on Advanced Materials and Modern Manufacturing (ICAMMM-2020) held at Adhi College of Engineering & Technology, Kanchipuram, Tamilnadu from 29th |
| 4 | Shashi Bahl | Fiber reinforced metal matrix composites - a review | International Conference on Advanced Materials and Modern Manufacturing (ICAMMM-2020) held at Adhi College of Engineering & Technology, Kanchipuram, Tamilnadu from 29th |
| 5 | A.K. Bagha, Shashi Bahl | Strain energy and finite element analysis to predict the mechanical properties of vapor grown carbon fiber reinforced polypropylene nanocomposites | International Conference on Recent Advances in Mechanical Engineering Research and Development (ICRAMERD |
| 6 | S.M. Chhipa, P. Kumar, A.K. Bagha, Shashi Bahl | Removing uncertainty in the boundary condition of five degree of freedom spring mass vibratory system using direct updating method | International Conference on Recent Advances in Mechanical Engineering Research and Development (ICRAMERD |
| 7 | Shashi Bahl, A.K. Bagha, S. Sehgal | Experimental investigations into sound transmission loss by different materials at aircraft noise | International Conference on Materials Processing and Characterization (ICMPC-2020) held at Indian Institute of Technology Indore (IIT Indore), Madhya Pradesh on 15th |
| 8 | M. Azeem, A. Haleem, Shashi Bahl, M. Javaid, R. Suman, D. Nandan | Big data applications to take up major challenges across manufacturing industries: A brief review | International Conference on Advancement in Materials, Manufacturing and Energy Engineering (ICAMME-2021) held at Maulana Azad National Institute of Technology Bhopal, Madhya Pradesh on 18th |
| 9 | S. Sajid, A. Haleem, Shashi Bahl, M. Javaid, T. Goyal, M. Mittal | Data science applications for predictive maintenance and materials science in context to Industry 4.0 | International Conference on Aspects of Materials Science and Engineering (ICAMSE-2021) held at UIET, Panjab University Chandigarh from 05th |
| 10 | V.K. Ram, S. Nandwani, S. Vardhan, Shashi Bahl, R. Samyal, A.K. Bagha | Microwave casting of stainless still through microwave hybrid heating | International Conference on Materials Science and Engineering (ICMSE-2022) held at Dr. B.R. Ambedkar NIT Jalandhar from 11th to 12th June 2022 |
Seminars
-
UGC – Sponsored Refresher Course in Research & Teaching Methodology (ID) from 20-6-2017 to 10-07-2017 (Three Weeks) organized by UGC-Human Resource Development Centre, Guru Nanak Dev University, Amritsar.
-
UGC – Sponsored Orientation Programme from 11-12-2018 to 07-01-2019 (Four Weeks) organized by UGC-Human Resource Development Centre, Panjab University, Chandigarh.
-
AICTE Recognized Faculty Development Programme on Operational Research – An Introduction from 20-04-20 to 24-04-20 (One Week) Organized by Applied Science Department, National Institute of Technical Teachers Training and Research, Chandigarh.
-
AICTE Recognized Faculty Development Programme on Nanomaterials and Devices from 27-04-2020 to 01-05-2020 (One Week) organized by Applied Science Department, National Institute of Technical Teachers Training and Research, Chandigarh.
-
AICTE Recognized Faculty Development Programme on Quantum and Energy Materials: Potential & Applications from 04-05-20 to 08-05-20 (One Week) Organized by Applied Science Department, National Institute of Technical Teachers Training and Research, Chandigarh.
-
AICTE Recognized Faculty Development Programme on NBA Accreditation of Engineering Programs from 11-05-20 to 15-05-20 (One Week) Organized by Mechanical Engineering Department, National Institute of Technical Teachers Training and Research, Chandigarh.
-
AICTE Recognized Faculty Development Programme on Life Skills Development from 18-05-2020 to 22-05-2020 (One Week) Organized by Education and Educational Management Department, National Institute of Technical Teachers Training and Research, Chandigarh.
-
AICTE Recognized Refresher course on Application of Nanoscience in Modern Day Research and Technology from 05-06-2020 to 18-06-2020 (Two Weeks) Organized by Applied Science Department, National Institute of Technical Teachers Training and Research, Chandigarh.
-
AICTE Recognized Industrial Training Programme on Energy Storage, Harvesting, Materials Characterization Techniques and Applications from 06-07-2020 to 31-07-2020 (Four Weeks) Organized by National Institute of Technical Teachers Training and Research, Chandigarh.
-
AICTE Recognized Refresher Course in Mechanical Engineering from 10-08-2020 to 21-08-2020 (Two Weeks) Organized by Mechanical Engineering Department, National Institute of Technical Teachers Training and Research, Chandigarh.
-
TEQIP-III Sponsored Short Term Course on Material Characterization Techniques from 24-08-2020 to 28-08-2020 (One Week) organized by Institute Instrumentation Centre, Dr. B. R. Ambedkar National Institute of Technology Jalandhar, Punjab.
-
TEQIP-III Sponsored Short Term Course on Future Scope in Engineering Materials and Tribology from 15-09-2020 to 19-09-2020 (One Week) organized by Department of Mechanical Engineering, Dr. B. R. Ambedkar National Institute of Technology Jalandhar, Punjab.
-
AICTE Sponsored Short Term Training Programme on Energy (Non Conventional Sources of Energy) from 26-04-2021 to 01-05-2021 (One Week) Organized by Department of Chemical Engineering, Beant College of Engineering & Technology, Gurdaspur, Punjab.
-
Short Term Training Programme on Introduction to Manufacturing Systems from 31-05-2021 to 04-06-2021 (One Week) Organized by Mechanical Engineering Department, National Institute of Technical Teachers Training and Research, Kolkata.
-
Short Term Training Programme on Renewable Energy Sources and Emerging Technologies from 07-06-2021 to 11-06-2021 (One Week) Organized by Department of Computer Science and Engineering, National Institute of Technical Teachers Training and Research, Kolkata.
-
Short Term Training Programme on Design and Development of content for e-Learning from 14-06-2021 to 25-06-2021 (Two Weeks) Organized by Department of Computer Science and Engineering, National Institute of Technical Teachers Training and Research, Kolkata.
-
AICTE Sponsored QIP Short Term Course on 4D Printing on Smart Manufacturing from 28-06-2021 to 03-07-2021 (One Week) Organized by Mechanical Engineering Department, National Institute of Technical Teachers Training and Research, Chandigarh.
-
Short Term Training Programme on Automation in Manufacturing Industries from 09-08-2021 to 13-08-2021 (One Week) organized by Mechanical Engineering Department, National Institute of Technical Teachers Training and Research, Bhopal.
Expert Talks
- Delivered an Expert Lecture in the Short Term Training Programme on Energy (Non-Coventional Sources of Energy held on 26th April to 01st May 2021 Organized by Department of Chemical Engineering, Beant College of Engineering & Technology, Gurdaspur. Delivered an Expert Lecture on Mechanical Vibrations: Analysis and Measurements held on 09th October 2020 Organized by Department of Mechanical Engineering, DAVIET Jalandhar. Delivered an Expert Lecture on Finite Element Modeling and Simulation of Metal Matrix Composites during TEQIP-III Sponsored Workshop on Finite Element Modeling and Analysis of Composites (WFEMAC2020) held on 18th August 2020 organized jointly by GCET, Jammu and UIET, PU, Chandigarh. Delivered an Invited Lecture on Applications, Processing Methods and Interfacial Characterization of Fibre Reinforced Metal Matrix Composites on 29th July 2020 Organized by Adhi College of Engineering and Technology, Kanchipuram, Tamilnadu.
