Back
Dr. Jujhar Singh

Dr. Jujhar Singh

Assistant Professor

Educational Qualification

  • Ph.D. (Mech. Engg.)-2012, PEC University of Technology, Sector 12, Chandigarh
  • M.E. (Mech. Engg.)-2004, Punjab Engineering College (PEC), Sector 12, Chandigarh
  • B.E. (Mech. Engg.)-2000, Guru Nanak Dev Engg. College, Ludhiana
  • Post Diploma (Prod. Engg.)-1996, Chandigarh College of Engg. and Technology (Diploma wing), Sector 26, Chandigarh
  • Diploma (Mech. Engg.)-1995, Chandigarh College of Engg. and Technology( diploma wing), Sector 26, Chandigarh

Teaching Experience

  • Assistant Professor Mechanical Engineering (Currently Working)

Area of Interest (Teaching)

  • Manufacturing Processes

Area of Interest (Research)

Awards & Honors

  • Awarded certificate of commendation for rendering more than a decade of valuable, dedicated services at Rayat-Bahra Group on 28 Jan. 2013. Best Educationist award by International Institute of education and Management for outstanding achievement and remarkable role in the field of education on 3 April 2014. Long and Meritorious award by Rayat-Bahra Group of Institutes after completed 13 years of service on 16 May 2014. Awarded certificate of Most Commendable member of the Institute by Rayat-Bahra Group of institutes on 16 June 2014.

Research Publications

Title of Paper Name of Author/s Journal Year ISSN Link
Reliability and Availability Evaluation of a Series Parallel System Subject to Random Failure Munish Mehta, Jujhar Singh and Manpreet Singh Indian Journal of Science and Technology DOI: 10.17485/ijst/2017/v10i27/116145, 2017 0974-5645 Ref Link
Performance Analysis and Maintenance Scheduling of a System using Runge-Kutta Method Munish Mehta, Jujhar Singh and Manpreet Singh International Journal of Engineering Science and Technology 2017 0975-5462 Ref Link
Numerical Analysis of Reliability and Availability of a Complex Repairable System Munish Mehta, Jujhar Singh and Manpreet Singh Journal of Mechanical Engineering Research and Developments, 2017 1024-1752 Ref Link
Detection of crack initiation in the ball bearing using FFT analysis, Gurjit Singh, Rajeev Kumar, Manpreet Singh, Jujhar Singh International Journal of Mechanical Engineering and Technology (IJMET), 2017 0976-6359 Ref Link
Characterization of Bearings on Different Rpm and Faults Rajeev Kumar, Manpreet Singh, Jujhar Singh, JaiinderPreet Singh, Piyush Gulati, Nitin Chauhan, Sumit Shoor Think India Journal 2019 0971-1260 Ref Link
Finite Element Analysis of A Muff Coupling Using CAE Tool Rajeev Kumar, Manpreet Singh, Jujhar Singh, Jaiinder Preet Singh, Piyush Gulati, Nitin Chauhan, Sumit Shoor Think India Journal 2019 0971-1260 Ref Link
Trend and time series analysis by ARIMA model to predict the emissions and performance characteristics of biogas fuelled compression ignition engine Sunil Mahla, Kulwinder Parmar, Jujhar Singh, Amit Dhir, Sarbjot Singh Sandhu, Bhupendra Chauhan; Energy Source, part A: Recovery, utlilization and environment effects, 2019 1556-7230 Ref Link
Parametric optimization of rice husk ash, copper, magnesium reinforced aluminium matrix hybrid composite processed by EDM Ram Narayan Muni, Jujhar Singh, Vineet Kumar, Shubham Sharma ARPN Journal of Engineering and Applied Sciences 2019 1819-6608 Ref Link
Influence of rice husk ash, Cu, Mg on the mechanical behaviour of Aluminium Matrix hybrid composites Ram Narayan Muni, Jujhar Singh, Vineet Kumar, Shubham Sharma International Journal of Applied Engineering Research, 2019 0973-4562 Ref Link
Fabrication of low elastic modulus Ti50Nb30HA20Alloy by Rapid Microwave Sintering Technique for Biomedical Applications, Chander Prakash, Sunpreet Singh, Shubham Sharma, Jujhar Singh, Gursharan Singh, Manoj Mittal, Harish Kumar Materials Today-Proceedings, 2019 2214-7853 Ref Link
Fabrication AL-CNT-Sicp hybrid nano-composite by spark plasma sintering Chander Prakash, Sunpreet Singh, Shubham Sharma, Jujhar Singh, Gursharan Singh, Advanced Science Letters. 2020 1936-6612 Ref Link
Evaluation of surface roughness in the turning of mild steel under different cutting conditions using backpropagation neural network Mohamed Rafik Noor Qureshi, Shubham Sharma, Jujhar Singh, Shaik Dewood Abdul Khadar, Rahmath Ulla Baig Proceeding of the Estonian academy of sciences, Manufacturing Engineering, 2020 1736-6046 Ref Link
A review of Recent Methods for Tool Wear Reduction in Electrical Discharge Machining Amoljit Singh Gill, Sanjeev Kumar, Jujhar Singh, Vivek Aggarwal and Shubham Sharma Surface review and letters, 2020 0218-625X / 1793-6667 Ref Link
Empirical investigations during WEDM of Ni-27Cu-3.15Al-2Fe-1.5Mn based superalloy for high temperature corrosion resistance applications Aggarwal, V.; Pruncu, C.I.; Singh, J.; Sharma, S.; Pimenov, D.Y Materials 2020 1996-1944 Ref Link
A comprehensive review of current developments on the waste-reinforced polymer-matrix composites for automotive, sports goods and construction applications: Materials, processes and properties Shubham Sharma P.Sudhakara S.K.Misra Jujhar Singh Materials Today: Proceedings 2020 2214-7853 Ref Link
Fabrication and characterization of coir/carbon fiber reinforced epoxy based hybrid composite for helmet shells and sports-good applications: influence of fiber surface modifications on the mechanical, thermal and morphological properties Yadvinder Singh, Jujhar Singh, Shubham Sharma, Thanh-Danh Lam, Duc-Nam Nguyen Journal of Materials Research and Technology, 2020 2214-0697 Ref Link
Investigation on Mechanical, Tribological and Microstructural properties of Al-Mg-SiT6/SiC/Muscovite-hybrid metal-matrix composites for high strength applications Shubham Sharma, Jujhar Singh, Munish Kumar Gupta, Mozammel Mia, Shashi Prakash Dwivedi, Ambuj Saxena, Somnath Chattopadhyaya, Rupinder Singh, Danil Yu Pimenov, Mehmet Erdi Korkmaz Journal of Material Research and Technology 2021 2238-7854 Ref Link
Comparative Performance of Copper, Graphite, Brass and Aluminium/Graphite Based Different Tool Electrodes for Optimizing the Material Removal Rate during Die-Sinking EDM of Stir-Casted, Al6061/SiC MMCs for Sustainable Manufacturing and Energy Applications Hardeep Singh, Jujhar Singh, Shubham Sharma, SP Dwivedi, Ahmad J Obaid Journal of Green Engineering 2021 1904-4720 Ref Link
Optimization of performance, combustion and emission characteristics of acetylene aspirated diesel engine with oxygenated fuels: An Experimental approach, Gursharan Singh, Shubham Sharma, Jujhar Singh, Som Kumar, Yadvinder Singh, Mohammad H. Ahmadi d, Alibek Issakhov Energy Reports 2021 2352-4847 Ref Link
A Comparative Numerical Analysis on the Effect of Welding consumables on the Ballistic resistance of SMAW joints of Armor steel. Ambuj Saxena, Shashi Prakash Dwivedi, Shubham Sharma, Vishal Shankar Srivastava, Gursharan Singh, J Singh, Somnath Chattopadhyaya, Catalin Pruncu Applied Sciences 2021 2076-3417 Ref Link

Administration Experience

  • Coordinator Purchase: To procure office/lab equipment as per purchase rule of university/Punjab Govt. Co-coordinator, Centre for Invention, Innovation, Incubation and Training (CIIIT) at I.K. Gujral Punjab Technical University, Sultanpur Lodhi. This centre is offering skill development advanced courses such as Design & Engineering, CAD Engineering, Product Lifecycle Management, Virtual Verification & Analysis, Industrial Robotics, Manufacturing Processes, Additive Manufacturing & Reverse Engineering, and Manufacturing Execution System for the students having qualification from ITI to Masters in Engineering. Faculty coordinator- Pradhan Mantri YUVA Yojana (Yuva Udyamita Vikas Abhiyan). PMYUVA is a centrally sponsored Scheme on entrepreneurship education and training being implemented by the Ministry of Skill Development and Entrepreneurship, Government of India.

Conferences

S.No Authors Title of Paper Name of Conference
1 Gursharan Singh, Jujhar Singh (2017), Advancements and Hybridization of Electric Discharge Machining (EDM) International Conference on advancements in Science & Technology (ICAST-2017), University school of sciences, Rayat- Bahra University, Mohali, Punjab, pp 76-81 (ISBN 9789386171429).
2 Munish Mehta, Jujhar Singh, Manpreet Singh (2018), Reliability Analysis of Sheet Manufacturing Unit of a Steel Industry⬝ Future Learning Aspects of Mechanical Engineering (FLAME-2018) Future Learning Aspects of Mechanical Engineering (FLAME-2018), Department of Mechanical Engineering, Amity University, Noida, Uttar Pradesh, India, 3
3 Shubham Sharma, Jujhar Singh, N. Jayarambabu, K. Venkateswara Rao, Anish Sachdeva, Gursharan Singh, SK Mahla (2019), Experimental analysis of symmetrical and phase identification structural properties of nanosize metamorphic aluminosilicate mineral (Al2O3.SiO2), 6th International conference on production and industrial Engineering (CPIE-2019), Dr B.R. Ambedkar National Institute of Technology Jalandhar-144011, India, June 8-10, 2019.
4 Shubham Sharma, Jujhar Singh, N.Jayaram Babu, Saraswathi Kailasa, K Venkateswara Rao, Anish Sachdeva and Abhinav Sharma, (2019), Investigating the Morphological analysis of Nickel Nanoparticles thin films deposited on Sapphire substrate using the Electron beam evaporation technique, 1st International conference on Materials Science and Engineering (ICMSE-2019), DR B R Ambedkar National Institute of Technology, 11-12 June 2019.
5 Jujhar Singh (2016), Blending of bio-diesel-A review National Conference on Engineering Research and Applications (ERA
6 Chander Prakash, Sunpreet Singh, Shubham Sharma, Jujhar Singh, Gursharan Singh, Manoj Mittal, Harish Kumar (2019), Fabrication of low elastic modulus Ti50Nb30HA20Alloy by Rapid Microwave Sintering Technique for Biomedical Applications, National Conference on Advances in Mechanical Engineering, National Institute of Technology, Delhi, March 16, 2019.
7 Chander Prakash, Sunpreet Singh, Shubham Sharma, Jujhar Singh, Gursharan Singh (2019), Fabrication AL-CNT-Sicp hybrid nano-composite by spark plasma sintering, National Conference on Advances in Mechanical Engineering, National Institute of Technology, Delhi, March 16, 2019.
8 Chander Prakash, Sunpreet Singh, Shubham Sharma, Jujhar Singh, Gursharan Singh (2019), Fabrication AL-CNT-Sicp hybrid nano-composite by spark plasma sintering, National Conference on Advances in Mechanical Engineering, National Institute of Technology, Delhi, March 16, 2019.
9      

Projects

  • Chief coordinator of Innovation and Entrepreneurship Development Centre (IEDC), Department of Science and Technology (DST), Govt. of India. (amount of Rs Rs. 13,30,000/- (Rupees thirteen lac thirty thousand only) letter No. 11/07/12-NEB No. 11/07/12-NEB (G) Dated 11/06/2012 and No. 11/07/12-NEB(C) Dated 11/06/2012)

  • Coordinator of project

  • Faculty Advisor of team

  • Faculty Advisor of team

  • Faculty advisor of the team

  • Faculty advisor of the team

  • Faculty advisor of the team

Expert Talks

  • Delivered expert lecture on
  • Delivered expert lecture on
  • Delivered expert lecture on
  • Delivered expert lecture on
  • Delivered expert lecture on
  • Delivered expert lecture on